Bearings Oil Additive

**Unapproved**

NanoLub® bearings oil additive is a new generation surface-reconditioning nano lubricant for bearing oil, based on mineral oil concentrate mixed with NanoMaterials’ proprietary super strong tungsten disulfide (WS2) multilayered nono-fullerene particles.

Applications

  • Especially formulated to significantly improve performance of standard bearing oils.
  • Extreme Pressure (EP Anti-Friction (AF) and Anti-Wear (AW) properties.
  • Can be used as part of the additives package of fully-formulated ready to use bearing oil.

Technology

 

Featuring a unique “dual action” effect: multi-layer WS2 nano-spheres lower friction and heating, thereby reducing mechanical wear. At the same time, friction causes nano-spheres to release tribofilms that attach to service crevices and re-smoothen them, thereby extending mechanical efficiency and apparatus life.

For more information on this product, contact your representative.

Compressor Oil Additive

**Unapproved**

NanoLub® compressor oil additive is a new generation surface-reconditioning nano lubricant for compressor oil, based on mineral oil concentrate mixed with NanoMaterials’ proprietary super strong tungsten disulfide (WS2) multilayered nano-fullerene particles.

Applications

  • Especially formulated to significantly improve performance of standard compressor oils.
  • Extreme Pressure (EP) Anti-Friction (AF) and Anti-Wear (AW) properties.
  • Can be used as part of the additives package of fully-formulated ready to use compressor oil or as a top up after market product.

Technology

Featuring a unique “dual action” effect: multi-layer WS2 nano-spheres lower friction and heating, thereby reducing mechanical wear. At the same time, friction causes nano-spheres to release tribofilms that attach to surface crevices and refinishes them, thereby extending mechanical efficiency and apparatus life.

For more information on this product, contact your representative.

Engine Oil Additive

**Unapproved**

NanoLub® engine oil additive is a new generation surface-reconditioning nano lubricant for engine oil. Featuring a unique “dual action” effect: multi-layer WS2 nanospheres lower friction and heating, thereby reducing mechanical wear. At the same time, friction causes anaospheres to release tribofilms that attach to surface crevices and refinishes them, thereby extending mechanical efficiency and apparatus life. NanoLub® engine oil additive is based on formulated synthetic oil concentrate mixed with NanoMaterials’ proprietory super strong tungsten disulfide (WS2) multi-layered nanofullerene particles.

Applications

  • Engine oil treatment for automotive and generator 4-stroke engines, including private cars, trucks, industrial engines, boats & motobikes.
  • Suitable for all types of engines: gasoline & diesel, modern or classic.
  • Suitable for all types of oils: synthetic, semi-synthetic or mineral.
  • Can be used as an AF/AW additive as part of the additives package of fully-formulated ready to use engine oil or as a top up after market product.

Key Features

  • Unique nanotechnology minimizes enginer wear – special formula creates a tenacious tribofilm that remains even after oil change, protecting your engine. This means longer equipment life and extended maintenance intervals.
  • Especially formulated for low friction – significantly reduces friction in engines in comparison to traditional lubricants.
  • Two-in-one solution. No need for two separate additives; simpler and less expensive to use with added benefits.

For more information on this product, contact your representative.

EP and Friction Modifier additives for Grease

**Unapproved**

Phibrochem represents Nanomaterials Ltd an Israeli manufacture of very unique nanotechnology products on a new class of inorganic nanostructures.

Nanomaterials founder Professor Reshef Tenne who was the first to prove that various inorganic compounds could also be synthesized into fullerene-like structures. Prof Tenne has received a multitude of awards for his discovery, and has been shortlist for the Nobel Prize for chemistry several times for his work in this field.

Nanomaterials Ltd. flagship lubricants line, the NanoLub, represents the first commercial vertical of inorganic lubricant additives that is based on the unique platform technology of tungsten disulfide (WS2) fullerene-like spherical nanoparticles. This product line includes additives for engine oil, gear oil, chain oil, additives for greases and dry lubrication. Our products are used in multitude of applications like automotive, heavy machinery, ball bearings lubrication and metal working, to name but few.

NanoLub® GH Series is a new generation surface-reconditioning Nano lubricant additive for grease.
The benefits of using GH-X compare to the current use of MOS2 can be summarized into 2 main categories:

1. For applications which require Extreme Pressure properties (very high temperatures, very high welding point, very high pressure, Etc.) our GH-X additive delivers much higher results than the MOS2.

In the attached you can see that:

  • The highest welding points you can receive with MOS2 is 400kg-500kg whereas when using the GH-X you can reach 620kg-800kg.
  • Scar diameter of 0.4mm – 0.45mm can be reached with GH-X whereas only a 0.5mm scar can be reached with MOS2.

2. For “normal” applications where the pressure is not very extreme – the treat rate of GH-X which you require is far less than the treat rate of MOS2 which is translated into large savings.

With NanoLub product line you could save a lot of money when using the GH-X instead of the MOS2 in all applications and in specific application where the MOS2 cannot deliver enough results (in very extreme conditions), the GH-X delivers.

As you can see this products not only bring new innovation to the market but can also reduce production cost and give better results.

For more information on this product, contact your representative.

 

Chain Oil Additives

**Unapproved**

NanoLub® MP-X is a new generation surface-reconditioning nano
lubricant for transmission and heavy duty oil. Especially formulated
to perform at extreme pressure conditions.

Featuring a unique “double action” effect: Multi-layers WS2 nanospheres lower friction and heat, thereby reducing mechanical wear.

At the same time, friction causes nano-spheres to release tribofilms that attach to surface crevices and re-smoothen them, thereby extending mechanical efficiency and apparatus life.

NanoLub® MP-X is based on formulated mineral oil concentrate mixed with NanoMaterials’ proprietary super-strong Tungsten Disulfide (WS2) multi-layered nanofullerene particles.

Key Features

  • Especially formulated for low friction – significantly reduces friction in industrial equipment in comparison to traditional lubricants.
  • Unique nano-technology to minimize equipment wear at extreme pressure – special formula creates a tenacious tribofilm that remains even after oil change, protecting your engine. This means longer equipment life and extended maintenance intervals.
  • Two-for-One solution. No need for two separate additives; simpler and less expensive to use with strong benefits.

For more information on this product, contact your representative.

 

Gear Oil Additives

**Unapproved**

NanoLub® MP-X is a new generation surface-reconditioning nano lubricant for transmission and heavy duty oil. Especially formulated to perform at extreme pressure conditions.

Featuring a unique “double action” effect: Multi-layers WS2 nanospheres lower friction and heat, thereby reducing mechanical wear.

At the same time, friction causes nano-spheres to release tribofilms that attach to surface crevices and re-smoothen them, thereby extending mechanical efficiency and apparatus life.

NanoLub® MP-X is based on formulated mineral oil concentrate mixed with NanoMaterials’ proprietary super-strong Tungsten Disulfide (WS2) multi-layered nanofullerene particles.

Applications

  • Oil treatment in automotive and industrial machinery.
  • For automotive applications in gears, manual transmission, rear and front differential, transfer case (4×4 vehicle, trucks) and final drive (tractors, earth moving equipment).

For industrial applications in gears, chains, conveyors and sliding components.

Key Features

  • Especially formulated for low friction – significantly reduces friction in industrial equipment in comparison to traditional lubricants.
  • Unique nano-technology to minimize equipment wear at extreme pressure – special formula creates a tenacious tribofilm that remains even after oil change, protecting your engine. This means longer equipment life and extended maintenance intervals.
  • Two-for-One solution. No need for two separate additives; simpler and less expensive to use with strong benefits.

For more information on this product, contact your representative.